3 QuickSeam Splice Tape (2-sided), 50' roll

This 3 wide 2 sided adhesive tape is factory laminated to an EPDM membrane that is used to join two pieces of PondGard liner together in stream applications or if you just want to add strength to a seam beneath cover tape.
This 3 wide 2 sided adhesive tape is factory laminated to an EPDM membrane that is used to join two pieces of PondGard liner together in stream applications or if you just want to add strength to a seam beneath cover tape. Requires cleaning of liner with QuickPrime Adhesive to improve tape adhesion. This product is a 10 foot roll of 3 wide 2 sided tape. Info on seaming liners: When seaming two EPDM liners together in a non-stream application, overlap clean liners, fold back to expose meeting surfaces and apply QuickPrime Adhesive with the QuickScrubber Tool wherever the liners will touch. When dry to the touch apply 2 sided tape to bottom liner and carefully fold top liner onto tape. Then roll top liner thoroughly with a seam roller to contact all surfaces and remove any air bubbles. Reapply QuickPrime over joint where liners meet. When dry to the touch, apply cover tape over joint and roll again with seam roller. When joining liners in a stream situation, we recommend only using the two sided tape instead of both to create a smooth shingle effect for water flow.

This 3 wide 2 sided adhesive tape is factory laminated to an EPDM membrane that is used to join two pieces of PondGard liner together in stream applications or if you just want to add strength to a seam beneath cover tape. Requires cleaning of liner with QuickPrime Adhesive to improve tape adhesion. This product is a 10 foot roll of 3 wide 2 sided tape.

Info on seaming liners: When seaming two EPDM liners together in a non-stream application, overlap clean liners, fold back to expose meeting surfaces and apply QuickPrime Adhesive with the QuickScrubber Tool wherever the liners will touch. When dry to the touch apply 2 sided tape to bottom liner and carefully fold top liner onto tape. Then roll top liner thoroughly with a seam roller to contact all surfaces and remove any air bubbles. Reapply QuickPrime over joint where liners meet. When dry to the touch, apply cover tape over joint and roll again with seam roller. When joining liners in a stream situation, we recommend only using the two sided tape instead of both to create a smooth shingle effect for water flow.

3M Splicing & Tabbing Tapes

Firestone ELEVATE QuickSeam Splice Tape 3`` 7,62cm x 30,5m RULL; Kastis 6tk, W56RAC1603

3M Splicing & Tabbing Tapes

QuickSeam Flashing is an uncured black EPDM flashing laminated to cured seam tape. QuickSeam Flashing is used to flash inside and outside corners,

QuickSeam FormFlash 9 Wide x 50' Roll of Form Flashing - W56RAC1650

223M™ Splittable Flying Splice Tape R7359, Blue, 50 mm x 50 m, 6.6 mil, 24 Roll/Case%22

Keep a few pieces of Firestone EPDM liner together using Firestone QuickSeam Splice Tape. These 2 rolls of double-sided, adhesive tape are great for seaming different liners together, helping form a stream or larger pond in your yard. Release paper covers one side of this tape for easy application, once your liner has been cleaned and primed with the appropriate Firestone products. Each roll seams up to 25 linear feet of liner, and the black color meshes with your existing EPDM.

Firestone QuickSeam Splice Tape, 3 inch x 25' Rolls, Pack of 2

GenTite 50-ft Roof Seam Tape at

The Scotch Linerless Rubber Splicing Tape is a linerless, premium-grade, rubber splicing tape used for splicing and terminating cables and wires. It withstands temperatures up to 194. F (90. C) with emergency overload up to 266. F (130. C). The tape has excellent electrical and mechanical properties to provide moisture-seal protection.

3M 130C Scotch Linerless Rubber Splicing Tape, 3/4 in x 30 ft

Aquascape EPDM Pond Liner Cover Tape. This single sided cover tape used for seaming and repairing rubber liner works best on a clean surface that has been primed with pond liner primer.

Aquascape - EPDM Liner One-Sided Cover Tape - 6 x 25

QuickSeam FormFlash - Holcim Elevate - PDF Catalogs, Documentation

Tesa- Equivalent Double Sided High Speed Flying Splice Tape 51680 for Coating and Printing - China Tesa 51680, Tesa 51680 Equivalent Tape

BestNest Firestone QuickSeam Splice Tape, 3 x 25' Rolls, Pack of 2 : Patio, Lawn & Garden

CONFORMABLE: Made with highly conformable ethylene rubber (EPR) PRIMARY INSULATION USE: Used for primary insulation for cable splice and termination

3M Scotch Rubber Splicing Tape 23, 1-1/2 in x 30 ft, Professional Premium Grade, Self-Fusing (EPR based) Rubber Electrical Insulating Tape, Highly

3M™ Splittable Flying Splice Tape 8387, Purple, 50 mm x 50 m, 7 mil, 24 Roll/Case

3M Scotch Linerless Electrical Splicing Tape 130C for Wires and Cables, 1-1/ 2 in x 30 ft, Rubber Backing, Self Fusing, UV Resistance, Highly Conformable, Moisture Seal, Black, 1 Roll: Electrical Tape: