AllFuel HST Stove Pipe Adaptor for 6 Diameter 304 Stainless Steel All Fuel Class-A Double Wall Insulated Chimney Pipe

AllFuel HST Stove Pipe Adaptor for 6" Diameter 304 Stainless Steel All Fuel Class-A Double Wall Insulated Chimney Pipe

AllFuel HST Stove Pipe Adaptor for 6 Diameter 304 Stainless Steel All Fuel Class-A Double Wall Insulated Chimney Pipe

Use a tee with clean out cap for through the wall installations to make the 90 degree turn on the outside of the wall. The front opening of the tee connects to the length of Class-A chimney that passes through theWall Thimble. The top opening of the tee connects to the rest of your vertical chimney stack. The bottom opening of the tee mounts to theBase Wall Supportwhich supports the weight of the chimney stack on the outside of your home.

AllFuel HST 6 inch Insulated Tee with Cap Double Wall

Compatible with AllFuel HST Class-A double wall chimney pipe. Can not be connected to other brands of class-A chimney. 304 Stainless Steel rign and

AllFuel HST Extended Roof Brace Kit for 6 Diameter 304 Stainless Steel All Fuel Class-A Double Wall Insulated Chimney Pipe

AllFuel HST 24 Tall Square Ceiling Support Box for 6 Diameter

Compatible with AllFuel HST Class-A double wall chimney pipe. Can not be connected to other brands of class-A chimney. 304 Stainless Steel inner and

AllFuel HST Tee With Clean Out Cap for 8 Diameter 304 Stainless Steel All Fuel Class-A Double Wall Insulated Chimney Pipe

AllFuel HST 30 Degree Elbow Kit for 6 Diameter 304 Stainless Steel All Fuel Class-A Double Wall Insulated Chimney Pipe

Use an Elbow Strap to prevent excessive weight on the elbow connector for offset installations. Use 1 elbow strap for ever length of pipe between the elbows. Made of 304 stainless steel. Locking clamp to tighten around pipe for secure hold.

AllFuel HST Elbow Strap for 6-Inch Inner Diameter Chimney Pipe

Copperfield 70653 6 Inch Dura-Vent Duratech

Dektite Premium #4 Red Silicone Metal Roof Pipe Flashing, High Temp, Square Base, Pipe OD 3 to 7

The 15° Elbow Kit for 8 in. I.D. chimney pipe is used to get past rafters or away from an obstruction like plumbing, HVAC, or the roof peak. Up to 2 lengths of chimney pipe (for a maximum run of 72 in. between elbows) can be added between elbows to allow for necessary spacing. An Elbow Strap is included and helps support the weight of the offset from the elbows. If your installation includes 2 lengths of pipe between the elbows a second Elbow Strap (sold separately) is required.

AllFuel HST 15 Degree Elbow Kit for 6-Inch Inner Diameter Chimney Pipe

Made of 304 stainless steel for superior corrosion resistance. 0.019-in thick inner and outer walls (17% thicker than our competition). High density 1.18-in thick ceramic fiber blanket insulation ensures no hot spots and no settling of insulation. Precision engineered twist lock connection for easy no tools assembly. Locking band included for a water tight seal between components.

AllFuel HST 6 in. x 6 in. Double Wall Chimney Pipe