Cherry Rivets Aircraft Spruce

4.5

(733)

Write Review

$ 0.99

Add to Cart

Qty

In stock

Description

Cherry Rivets Unusual mandrel design of Cherry N Rivets holds rivet and mandrel firmly together prior to installation and insures positive mandrel retention in the installed rivet.
Attention: Avdel has changed the mandrel design for some of their Cherry "N" Rivets. The change has not effected the strength of the rivet. CHERRY N RIVETS CHERRY Q RIVETS Break mandrel rivets Conforms to MIL-R-24243 and IFI-114 Standards Structural-Self-plugging rivets LOW COST Substantial savings in installed costs can be realized when Cherry N Rivets are substituted for spotwelds, screws or bolts. HIGH SHEAR STRENGTH Cherry Q Rivet mandrel plugs the entire length of the rivet sleeve, providing full shear strength values for structural or load-bearing applications. FAST INSTALLATION Quick and easy to use with hand or power riveters, Cherry N Rivets have endless fastening applications in manufacturing, maintenance. SEALING CAPABILITY Specially designed mandrel of the Q Rivet is engineered to effect a seal, upon installation which offers resistance to leakage. UNIQUE FEATURES Unusual mandrel design of Cherry N Rivets holds rivet and mandrel firmly together prior to installation and insures positive mandrel retention in the installed rivet. VIBRATION RESISTANT Rivet sleeve curls over end of mandrel to insure its positive retention. NO MANDREL POP OUTS As the mandrel is drawn into the rivet, the end of the rivet sleeve closes in an elliptical configuration Iocking the mandrel firmly in place! CHERRY N RIVET IDENTIFICATION CODE CHERRY Q RIVET IDENTIFICATION CODE First letter is rivet material: A=5052 Aluminum B=5056 Aluminum C=Stainless M=Monel S= Steel U=Copper First letter is rivet material: A=5052 Aluminum B=5056 Aluminum C=Stainless M=Monel S= Steel Second letter is mandrel material: A = 7178 Aluminum, S = Steel, C = Stainless Second letter is mandrel material: A = 7178 Aluminum, S = Steel, C = Stainless Third letter is head style: P = Protruding L = Large C = Flush Third letter is head style: P = Protruding L = Large C = Flush First number is rivet diameter in 32nds of an inch: For example,--4 is 4/32nds or 1/8" diameter Fourth letter is type of rivet: Q = Cherry Q Rivet, structural, self-pluggingFor example,--8 is 8/16ths or 1/2" grip length Second number is rivet maximum grip length in 16ths of an inch:For example,--6 is 6/16ths or 3/8" grip length First number is rivet diameter in 32nds of an inch: For example,--6 is 6/32nds or 3/16" diameter Second number is rivet maximum grip length in 1/16 of an inch: For example, 8 is 8/16ths or 1/2" grip length MINIMUM RIVET SHEAR AND TENSILE STRENGTH (Ibs.) MINIMUM RIVET SHEAR AND TENSILE STRENGTH (Ibs.) RIVET DIA. BS SERIES ALUM RIVET / STEEL MAND. GRADE 19 MS SERIES MONEL RIVET / STEEL MAND. GRADE 40 CC SERIES STAINLESS RIVET / STAINLESS MAND. GRADE 51 Shear Tens Shear Tens Shear Tens 3/32 125 175 200 300 230 280 1/8 200 325 350 525 450 600 5/32 325 450 600 900 750 1000 3/16 430 650 750 1100 1000 1300 1/4 750 1050 1450 2150 1700 2250 RIVET DIA. BS SERIES ALUM RIVET / STEEL MAND. GRADE 19 MS SERIES MONEL RIVET / STEEL MAND. GRADE 40 CC SERIES STAINLESS RIVET / STAINLESS MAND. GRADE 51 Shear Tens Shear Tens Shear Tens 1/8 350 325 650 525 700 600 5/32 525 450 950 900 1050 1000 3/16 750 650 1450 1100 1650 1300 1/4 1250 1050 2350 2150 2450 2250