Klein Tools 53857 1.951 Knockout Punch, 1-1/2 Conduit

Easily punch holes for1-1/2-Inch EMT conduit. Has a maximum capacity of 10 gauge mild steel. Cuts aluminum fiberglass and plastic as well. Optimized design reduces wrench effort. Slugs are split inside for easy removal.

Holemaking Tools Knockout Punches, Drill Bit Sets, Carbide Hole Cutters

Klein Tools 1.951-Inch Knockout Die for 1-1/2-Inch Conduit, Model 53858*

Easily punch holes for 1-1/4-Inch EMT conduit. Has a maximum capacity of 10 gauge mild steel. The optimized design reduces wrench effort.

Klein Tools 53849 1.701 Knockout Punch, 1-1/4 Conduit

Klein Tools 53872 Knockout Draw Stud 3/4 x 4

Klein Tools 53838 1.362-Inch Knockout Die for 1-Inch Conduit

Klein Tools 53857 1.951-Inch Knockout Punch for 1-1/2-Inch Conduit - Hand Tool Knockout Punches

Gardner Bender four-point knockout punches and dies are designed to punch clean, round holes through 10-gauge mild steel, 12-gauge stainless steel or other soft metals up to 0.135 inches in thickness. Punches and dies are interchangeable, in any combination, with most brands of knockouts. This kit includes punch, die and drive screw to punch a hole diameter sufficient for 3/4 inch diameter pipe/conduit; actual hole diameter is 1.086 inches.

Gardner Bender KOS-750B 3/4-in Knockout Set

Klein Tools 53857 1.951 Knockout Punch, 1-1/2 Conduit

Maximum capacity of 10 gauge mild steel Also cuts aluminum, fiberglass and plastic Punches holes cleanly and accurately Weight: 8.8 ounces

Klein Tools 53857 1.951-Inch Knockout Punch for 1-1/2-Inch Conduit