Standard Size - High Torque - Metal Gear Servo : ID 1142 : $19.95 : Adafruit Industries, Unique & fun DIY electronics and kits

Adafruit Industries, Unique & fun DIY electronics and kits Standard Size - High Torque - Metal Gear Servo : ID 1142 - This high-torque standard servo now comes in a metal-gear flavor, for extra-high torque (10 kg*cm!) and reliability! It can rotate at least 120 degrees (60 in each direction) with a classic 1.5-2.5ms pulse, but if you can extend your pulses it can go up to about 170 degrees - it
This high-torque standard servo now comes in a metal-gear flavor, for extra-high torque (10 kg*cm!) and reliability! It can rotate at least 120 degrees (60 in each direction) with a classic 1.5-2.5ms pulse, but if you can extend your pulses it can go up to about 170 degrees - it varies a bit servo-to-servo. You can use any servo code, hardware, or library to control these servos. Good for beginners who want to make stuff move without building a motor controller with feedback & gearbox. Comes with a bunch of plastic horns, as shown. We now carry the Tower-Pro MG-995, they are very nice, high-quality servos, excellent for use in robotics.To control with an Arduino, we suggest connecting the orange control wire to pin 9 or 10 and using the Servo library included with the Arduino IDE (see here for an example sketch). Position "0" (1.5ms pulse) is middle, "90" (~2ms pulse) is all the way to the right, "-90" (~1ms pulse) is all the way to the left.

This servo is just like our classic Micro Servo but has 3 alligator clip test leads at the end! This makes it perfect for plug-and-play support with

Micro Servo with Alligator Clips

Adafruit 16-Channel 12-bit PWM/Servo Shield - I2C Interface

Standard Size - High Torque - Metal Gear Servo : ID 1142 : $19.95 : Adafruit Industries, Unique & fun DIY electronics and kits

Micro Servo - MG90D High Torque Metal Gear : ID 1143 : $9.95 : Adafruit Industries, Unique & fun DIY electronics and kits

If you bought a servo from us you probably got a bunch of plastic add-ons that you can snap onto the rotating part of the servo. These are called

Machined Aluminum Servo Arm

This high-torque standard servo can rotate approximately 180 degrees (90 in each direction). You can use any servo code, hardware, or library to

Standard servo - TowerPro SG-5010

Adafruit 16-Channel 12-bit PWM/Servo Shield - I2C interface : ID 1411 : $17.50 : Adafruit Industries, Unique & fun DIY electronics and kits

Robotics & CNC, Servos Products Category on Adafruit Industries

If you bought a servo from us you probably got a bunch of plastic add-ons that you can snap onto the rotating part of the servo. These are called

Standard Servo Arm and Horn Set - 25 Spline

Stretch out your servo connections with this flexible servo extension cord. It has a 3 pin shrouded male connection to plug your servo into and

Servo Extension Cable - 30cm / 12 long

Standard Size Ultra High Torque Servo - TowerPro MG959 : ID 5298 : $39.95 : Adafruit Industries, Unique & fun DIY electronics and kits

Continuous Rotation Micro Servo [FS90R] : ID 2442 : $7.50 : Adafruit Industries, Unique & fun DIY electronics and kits

Micro Servo with Alligator Clips : ID 5592 : $7.95 : Adafruit Industries, Unique & fun DIY electronics and kits