NanoSkin AutoScrub Wash Mitt Fine Grade

NanoSkin AutoScrub Wash Mitt Fine Grade | Synthetic Clay Bar Alternative works fast and achieves professional results with the new advanced rubber polymer technology, which replaces the use of clay bars.
NanoSkin AutoScrub Wash Mitt Fine Grade | Synthetic Clay Bar Alternative • Lasts up to 4 times longer than clay bars• For a flawless “show room perfect” shine• Glides on & off easily for a slick finish• If inadvertently dropped on shop floor, simply rinse clean Product Detail NANOSKIN AUTOSCRUB System works fast and achieves professional results with the new advanced rubber polymer technology, which replaces the use of clay bars. It safely and easily removes paint over spray, water spots, fresh tree sap, rail dust and other bonded surface contaminants from the surface of automotive paint, glass, moldings and plastic. Unlike the clay bar, the AUTOSCRUB can be cleaned by simply rinsing off the accumulated contaminates with water. If you drop the AUTOSCRUB on the ground, no worries, just rinse the sponge pad clean and you're ready to keep using it. Easy glides allows for sturdy and controlled handling, unlike clay bars where constant reshaping is required.   Application *For surface prep., use with NANOSKIN GLIDE Instant Spray Lubricant *To achieve best result on the paint, use with NANOSKIN NANO SHOCK Hydrophobic Spray Lubricant Sealant. *For glass prep. and hydrophilic anti-static sealant, use with RAIN PREP Glass Cleaner/Activator then follow with RAIN Glass Sealant.   DIRECTIONS: Use ONLY on clean, cool paint and out of direct sunlight. DO NOT work on the surface below 55°F and over 144°F. Please use in an inconspicuous place for the first time in case of unexpected adverse effects on paint surface. Mix 1 oz of NANOSKIN BUBBLE BATH Wash & Shine Shampoo per gallon of water.Rinse surface with water to flush away loose dirt.Wash and rinse in sections with AUTOSCRUB Wash Mitt using light pressure.Begin with the roof, and work the suds down to the hood, trunk and sides.Rinse with clean water.Dry with clean and soft towels.NOTE: Sufficient lubrication is crucial to the AUTOSCRUB application. Plain water is NOT an adequate lubricant. AUTOSCRUB is not solvent resistant. Remove tar & grease before application   Helpful Tips: The AUTOSCRUB has a protective coating to ensure stability within transportation. To break in the pad, moisten the AUTOSCRUB with desired lubricant. Moisten a portion of window glass or other glass surface. Rub AUTOSCRUB in circular motion against the glass for 30~60 seconds. You may see a white soapy foam. This is the protective sealant coming off. Don’t use until the polymerized rubber is soft and slightly tacky. Cold temperatures may stiffen pad. Warm surface before using. Total Import Solutions is not responsible for the misuse of this product or if the product is used in any other way than directed.   There is a significant difference between NANOSKIN AUTOSCRUB and clay bars. An outstanding machine/advanced polymer combination makes AUTOSCRUB the best contamination removal tool ever.

The NanoSkin AutoScrub Wash Mitt can replace the need for a clay bar by safely and easily removing surface contamination! This process is much faster than a traditional clay bar and you can get the same great clean surface upon completion. This microfiber mitt has a special rubber polymer coating on one side that actually loosens and removes particles.

Nanoskin (AS-016) Autoscrub Fine Grade Wash Mitt

Nanoskin Auto Scrub Clay Pad – Double Diamond Detailing Supplies

2018 BMW 650i - 🌴 A Miracle Detailing - CQuartz Finest Reserve

Nanoskin Autoscrub 6 Pad Fine Grade

Nanoskin Autoscrub 6 Pad Fine Grade

NANO SHOCK Hydrophobic Spr ay Wa x & Sea lant cleanses and seals the pai nt, while gliding the AUTOSCRUB back and forth. Through the use of advanced polymer technology, NANO SHOCK has created a 1-step lub ricant polymer sea lant that actually smooths the surface, repels water, enhances gloss, dissipates static, and adds additional protection to your finish. NANO SHOCK can also be used on glass, chrome, and plastic.

Nanoskin (NA-NSE128) Nano Shock Instant Lubricant Sealant - 1 Gallon

Nanoskin Autoscrub Wash Mitt - Fine Grade Blue - GAP Auto

0default

Nanoskin Autoscrub 6 Pad Fine Grade

The Nanoskin AutoScrub Fine Grade Wash Mitt is a great alternative to clay bars, one side is a microfiber material, the other is a is a polymer

Nanoskin AutoScrub Wash Mitt - Fine Grade

Nanoskin (AS-010) Autoscrub Medium Grade Wash Mitt