Pellet Vent - UPP - Type L/PL

4.8

(789)

Write Review

$ 93.99

Add to Cart

Qty

In stock

Description

Residential and commercial HVAC vents, flues, pipes and liners for stoves, chimneys, furnaces, and other applications.

DuraVent 24 PelletVent Pro Straight Length Pipe, 4 / Black 4PVP-24B

DuraVent 3 in. H X 12 in. W Silver Steel Pellet Vent Kit - Ace Hardware

Type L pellet vent pipe provide the core part of the chimney system. The rolled-over male end eliminates sharp edges and internal spacing bead assures uniform insulating air space between pipe walls.

Selkirk 3vp-12 VP Pellet-Stove Pipe, 3 x 12-In.

Metalbest 7RV-TFA RV 7 Type B GAS Vent Tall Cone Adjustable Pitch Roof Flashing Galvanized

Flashings are used to seal the opening where the chimney penetrates the roof and to divert rain and snow down from the roof and away from the chimney system.A series of adjustable flashings are available depending on your roof pitch. A flat and low pitch flashing is used to seal flat and low pitch roof (up to 2/12 pitch) openings. To determine your roof pitch, measure the number of inches from the end of a level ruler down to the roof. This is the rise for 12 in of run.

Selkirk 6 inch Adjustable Roof Flashing

PelletVent Pro is a venting system designed for stoves and inserts that use wood pellets and oil fuel. It is also built to vent biofuel products such as corn, switch grass, cherry pits, soybeans, coffee husks, to name a few. Rate for continuous feed use flue temperatures up to 570° fahrenheit. All PelletVent Pro components that come into contact with flue gases are built with an inner wall or corrosion resistant super-ferritic metal.