Perfect-It Rubbing Compound - Step 1 for Painted Surfaces – Ship to Shore Marine

4.7

(413)

Write Review

$ 26.50

Add to Cart

Qty

In stock

Description

The first step in 3M's top-of-the-line Perfect-It paint finishing system. After fine sanding, use Perfect-It Rubbing Compound as Step 1 in the Perfect-It paint finishing system to achieve a high gloss finish on 2-part urethane painted surfaces — like those on your boat or car. This state-of-the-art compound utilizes bo
The first step in 3M's top-of-the-line Perfect-It paint finishing system.
After fine sanding, use Perfect-It Rubbing Compound as Step 1 in the Perfect-It paint finishing system to achieve a high gloss finish on 2-part urethane painted surfaces — like those on your boat or car.

This state-of-the-art compound utilizes both abrasive and chemical and technologies to remove fine sanding scratches left by Trizact P3000 grit foam blending discs, or light surface oxidation or hazing. See Related Products, below.

Apply using either a 3M wool pad or a foam compounding pad.
Works on all types of paints, leaving a fine finish.

• When buffing, use the 3M single-sided Perfect-It III Wool Hookit Compounding Pad (MMM 05719), or double-sided SuperBuff™ III Wool Compounding Pad (MMM 05703), as you prefer
• Work a 2 ft x 2 ft area at a time
• Suggested buffer speed: 1200 - 2000 rpm

3M™ Marine Rubbing Compound

Suggested for heavy, aggressive compounding of oxidized gelcoat and marine paint. Clings to paint and gelcoated surfaces - remains wet on the job with little or no mess. Buffs to high gloss with minimum of swirl marks. Can be used by hand or machine. Maintains high rate of cut with constant pressure.