QU90008 Gear Marking Compound

Buy Now QU90008 Gear Marking Compound is used for checking the tooth contact pattern when setting up axle ring and pinion gears.
QU90008 Gear Marking Compound is used for checking the tooth contact pattern when setting up axle ring and pinion gears. Contents net wt. 3g. USA Made. Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project! Dan the Gear Man® Tech Notes: Best Results  To Apply Wear Gloves  California Proposition 65 MSDS Matching Parts Applications Tech Note 1: Best Results For best results, there must be some resistance applied to the differential and ring gear as you turn the pinion gear. For a rear axle, you can install the axle shafts and brake drums and lightly apply the parking brakes. For front axles, put a wrench on a ring gear bolt and apply pressure against the rotation of the gear. Tech Note 2: To ApplyBrush the Gear Marking Compound on both sides of several ring gear teeth. Rotate the pinion gear so it turns the ring gear several times in both directions. Check the contact pattern with the desired pattern show in a service manual or installation instructions specifically intended for the gear set you are using. Tech Note 3: Wear GlovesWear gloves when using Gear Marking Compound. Tech Note 4: California Proposition 65This product contains a chemical known in the State of California to cause cancer. This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. (source MSDS dated 4/17/2018) Tech Note 5: MSDSMSDS Tech Note 6: Matching PartsQT9404 Application BrushQU90009 Universal Axle Service Pack Applications:  Universal for all Axle Gear Sets

Qu50896 3.42 Ratio Ring and Pinion Set for AAM 11.5 Rear Axles

QU20272U Used Dana 60 Internal Diff Kit

QU50729 2007-2013.5 Loaded Differential Case Assembly for AAM 925

QU42029 Dana Reusable Model 50 Monobeam - Model 60 High Performance Differential Cover Pan Gasket by Spicer is a steel core performance gasket that can be reused multiple times.

Qu42029 Dana 50/60 High Performance Reusable Diff Cover Gasket

A&A Auto Stores - Permatex 80038 Differential Ring And Pinion

These 35 spline open differentials are complete with factory installed Spider Gear set, differential bearings, ring gear bolts, and differential shims. Also includes either RTV sealant or differential cover gasket.

Dana Axle Qu40662 Slow Ratio 35 Spline Loaded Differential Case Kit Dana 60/Super 60

Qu40252 Dana 60 4.10 Ratio Genuine Dana Spicer Ring and Pinion Set

Yukon Gear Marking Compound & Brush, 10ml, 5 Pack (2ml

Lubricants for 1960-66 GM Dana 44 Closed Knuckle Front Axle

Tk40260 Dana 80 Outboard Differential Bearing Spacer Set - TK40260 Dana 80 Outboard Differential Bearing Spacer Set includes two thick steel genuine Dana Spacers that fit between the differential bearing cups and axle housing on all 1994-2002 Dodge Ram 2500, Ram 3500 Dana 80 rear axles. TK40260 is also the correct Outboard Bearing Spacer Set for most 1992-2002 Dana 80 Rear Axles in GM motor home and P-truck models. USA Made.

Tk40260 Dana 80 Outboard Differential Bearing Spacer Set 6640260

Qu40577 7/16 ID Tapered Lock Wedge for Dana Rear Axles

Yukon ring & pinion gears are a great upgrade for virtually any truck – whether towing, hauling, racing, off-roading, or restoring performance lost when using oversize wheels and tires on a lifted truck. When taller tires are added to your ride, you can expect a decrease in acceleration. Installing the correct set of ring & pinion gears will revive your acceleration and allow your truck to run more efficiently.

Yukon Gear & Axle High Performance Ring & Pinion Set, Dana 50, Reverse Rotation, 5.38 Ratio - YG D50R-538R

is a brand new Dana 3.73 ratio gear set. 3.73 ratio Dana 50 axles were made from 1999-2005. Ring gear tooth count is 41, pinion gear tooth count

QU20236U Used 3.73 Ratio Dana 50 Ring and Pinion Set

QU11059 Pinion Shaft Lock Screw

Product Details:, Gear Marking Paint Compound Yellow 1 OZ Squeeze Tube, Parts Included:, (1) tube, Fits:, Used for checking for proper mesh of ring

Gear Marking Paint Compound Yellow 1 OZ Squeeze Tube