Resin Moulding Casting Tank/Pot 20 Litre Internal Dimensions Height = 39cm Diameter = 32cm. 60Psi maximum working pressure. Casting under pressure is the best way to make high quality resin castings. This is especially true with difficult recesses and complex moulds. Pressure casting compresses air bubbles to sizes hard to detected by the human eye creating a virtually bubble free casting. Simply cast your part in your mould and then insert your mould into the pressure pot. Apply positive air pressure from any regulated compressor and leave to cure under pressure. These tanks are modified for casting only and can not be used for paint. All unused outlets are permanently capped with 150psi 316 stainless steel caps. Important points regarding pressure tanks: The maximum working pressure is governed by a mechanical safety valve, recommended good working practice is to use at a working pressure of 60 Psi or below. Constant air supply - No pressure tank is 100% air tight so whilst in use it must be connected to an air supply so the unavoidable slight loss is automatically balanced.
Performance Series Resin Casting 20 Gallon Pressure Tank – Finish Systems
Resin Casting Accessories – Turners Warehouse
Plastic Syringe – 10ml or 60ml Glassfibre and Resin Supplies Ltd
Glow Worm™ Glow-In-The-Dark Powders
A Pressure Pot Made for Resin Casting - No Conversion Needed!
Glow Worm™ Glow-In-The-Dark Powders
Rebound™ 25 – Self Thickening Brush-On Silicone
The Pressure Pot is designed for assuring bubble free and air-trap free castings
Pressure Pot for Resin Casting
Pressure Pot Resin
Ancillary Tools, Kits and Equipment
5 Gallon (20 Liters) Pressure Pot Tank for Resin Casting - Heavy Duty Powder Coated Pot with Air Tight Clamp On Lid, Caster Wheels, Regulator, Gauge - Use for Curing Resin in Casting Molds
Pressure Pot Made For Resin Casting (No Setup Required) - The California Air Tools 2.5 Gallon Pot
Pressure Pot for Resin Casting
Pressure Pot Made For Resin Casting (No Setup Required) - The California Air Tools 2.5 Gallon Pot