Glaxs is a high adhesion system for indoor and outdoor bonding of ceramic, porcelain, and similar surfaces.
Glaxs is a high adhesion system for indoor and outdoor bonding of ceramic, porcelain, and similar surfaces.
Transparent Cartridge Glue
Available in a wide variety of colors. Requires use of special M200XMR Cartridge Gun.
GLAXS ADVANTAGES:
VOC free
Excellent adhesion
Ultra rapid
Excellent color stability to sunlight
Glossy, shiny and easy to polish
Indoor and Outdoor use
Pre-dosed for easy dispensing
Comes with 2 mixing nozzles
GLAXS CLEAN WHITE INSTRUCTIONS FOR USE:
All the surfaces to be treated must be cleaned and free of dust and grease.
In case of glossy and/or smooth surfaces, we suggest to scrub the surfaces with sandpaper before gluing.
Remove the threaded extremity and uncap the cartridge.
Fix the mixer to the cartridge through the threaded nozzle.
Before applying the glue on the surfaces, do spurge around 5 gr in line.
Use only guns approved by Tenax, MK Sulzer ratio 2+1 H236M and Mixpac DM200-01 ratio 2+1.
After usage, clean the nozzle, replace the cap and discard the mixer after use. Product will not set below +1°C.
SHELF LIFE:
Glaxs Clean White in cartridge will last at least 12 months, in normal conditions between 18-25°c, kept away from source of heat, humidity and sun light.
SAFETY RULES:
Resin and hardener are chemical products, please read the safety data sheet before usage and the rules written on the product label.
Gel time in bulk at 77°: 3-5 min
Tacky free time at 77°: approx. 15 min
Working time at 77°: 45-60 min
Temp range for use after hardening: -13°F to 140°F
Viscosity cps 25°C 20 r.p.m (ASTM D2196)
tixotropic liquid
Density at 25°C gr/cm3
1.27
Aspect
colored liquid
Ratio of use glue/hardener
2+1
Gel time (in bulk) at 25°C in min
3-5 min
Time for handling pieces
15-20 min
Working time suggested at 25°C in min
45-60 min
Minimum reaction temperature
+1°C
Minimun temperature of use after hardening
-25°C
Minimun temperature of use after hardening
+60°C
Shelf life at 18-20°C
24 months
Adhesion force in MPa at 25°C on natural stone, diamond cut surface after 1 hour (ASTM D 4541)*
9.0 - 10.0
Adhesion force in MPa at 25°C on natural stone, diamond cut surface after 24 hours (ASTM D 4541)*
9.5 - 10.5
Adhesion force in MPa at 25°C on quartz, diamond cut surface after 1 hour (ASTM D 4541)*
9.0 - 10.0
Adhesion force in MPa at 25°C on quartz, diamond cut surface after 24 hours (ASTM D 4541)*
12.0 - 13.0
Adhesion force in MPa at 25°C on ceramic, diamond cut surface after 1 hour (ASTM D 4541)*
9.0 - 11.0
Adhesion force in MPa at 25°C on ceramic, diamond cut surface after 24 hours (ASTM D 4541)*
10.0 - 13.0
Tenax Fixtop Installation Epoxy Adhesive
Stone Glue Cartridges, Porcelain Glue Cartridges, Silicone Polymer Cartridges
Tenax Multibond - Casper
Kona White 613 Tenax GLAXS Fast Cartridge 215 ML - 2 Pack: : Industrial & Scientific
Tenax Glaxs Cartridge Glue, Stone Glue
Tenax 2:1 Cartridge Gun for 215 ml Glaxs, Mastidek, and Strongbond - Eastern Marble & Granite Supply
Distributors With Direct Website LinksKobi ToolsGranQuartzDiamond Tool StoreEastern Marble & GraniteTenax has distributors across the USA. Please
Absolute Black - P Glaxs Cartridge Adhesive
Trilium 215 ML Mastidek Fast Adhesive Outdoor Cartridge for DDekton Trilium, Outdoor Dekton Adhesive
Starch Glaxs 2:1 Cartridge for Bonding Ceramic, Porcelain and Sitnered Stone Surfaces During Fabrication
Tenax GLAXS Fast Cartridge - Obsidian, 215 ML
DeFusco Industrial Supply - TENAX ELIOX EPOXY CAULK (A+B), 210ML The power of Tenax Eliox Epoxy Caulk, now in the convenience of a cartridge! Suitable to fill, glue and laminate marble, stone
Cane Sugar 406 Tenax GLAXS Fast Cartridge 215 ML - 2 Pack
Tenax Glaxs Fast 2+1 Fast Transparent 215 ml: : Tools & Home Improvement
TENAX Glaxs Fast Glue - Double Cartridge 4 Nozzles (Cover Up Colours)
TENAX GLAXS – ASM Supplies Ltd