Thread Zap - Nylon / Polyester Thread Burner

STOP USING A LIGHTER TO BURN YOUR THREAD ENDS!!!  Seriously.   The very fine wire tip allows you to get incredibly close to your project in order to melt thread ends without burning everything around it.  With a fresh battery, the tip will get red hot almost instantly.  Placing the tip close to the thread transfers enough heat to melt the thread without scorching itso, no black thread ends to ugly up your very nice looking final product.   Lessons learned: Don't be shy about replacing the battery.  The battery will start to lose its juice after about an hour or two worth of use - the tip will still get very hot, but not glowing red hot.  Using the thread zap at this stage will result in stringy thread hair and you're more likely to risk getting the tip too close to
STOP USING A LIGHTER TO BURN YOUR THREAD ENDS!!!  Seriously.   The very fine wire tip allows you to get incredibly close to your project in order to melt thread ends without burning everything around it.  With a fresh battery, the tip will get red hot almost instantly.  Placing the tip close to the thread transfers enough heat to melt the thread without scorching itso, no black thread ends to ugly up your very nice looking final product.   Lessons learned: Don't be shy about replacing the battery.  The battery will start to lose its juice after about an hour or two worth of use - the tip will still get very hot, but not glowing red hot.  Using the thread zap at this stage will result in stringy thread hair and you're more likely to risk getting the tip too close to your leather and burning it. Leave a minimum 1/8 of thread end sticking out to use with the thread zap.  You can leave the melted thread nub on the surface, tuck it in the stitch hole (I use a scratch awl to do this), or tuck it and use some glue to hold it in place. The tips are made of thin wire and are easily bent/broken if you're not careful about how you set it down as well as other things on a cluttered workbench bumping in to it.  Accidents aside, the metal components of the tip will wear out after a lot of use and it will need to be replaced.  Always use the cap when you're done and it's a good idea to spend the extra $5.50 for a 2-pack of replacement tips to have handy. *Requires 1 AA battery (not included)

Thread Zap II 2 Burner Welding Wax Pen,Soldering Crayons for Jewelry Mould,Hot Stitching Stamping Burning Tools - AliExpress

Jewelry Welding Pen, Crayon Stamping, Hot Wax Welding

Thread burner - 日本

Thread-Burner Pen 5.11in Thread-Zap Push Button Burn and Melt Thread with-Touch - AliExpress

The Beadsmith Thread Zap - 5.25” Thread Burner - Plus 2 Pack Replacement Tips Included - Trim, Burn and Melt Thread with one Touch, Ideal for Finishing Bead Weaving and stringing Projects

Thread Zap Thread Burner Push Button Battery Operated (1xaa) - Temu

How to Use the BeadSmith Cordless Thread Zap II Thread Burner Tool

How to Use Thread Burners Thread Zap Review

Thread Zap Thread for Burner 6 inches Battery Operated Trim Burn and Melt Thread with one for Touch for Finishing Bead W - AliExpress

Thread Zap II 2 Thread Burner Welding Wax Pen Welding Wax Pen Wire

🔋 Buy melting welding wax pen online with fast delivery and fast shipping. The product is used for welding replacement and polishing. Find welding

Thread Zap Burner Welding Replacement Melting Welding Wax Pen Welding Crayons for Jewelry Mould Wax, Crayons, whithout battery