Brass, 32P, 20 Tooth, D15T Spline Servo Gear - ServoCity

This 20 tooth servo gear has a 15 tooth servo spline found on numerous Hitec Large Size (aka Giant Scale) servos. The splined hole allows this servo gear to fit snugly onto the splined output shaft of your servo. The stock servo screw will pull the gear in place so that it bottoms out on the top of the spline, ensuring the gear will run true. Given the repeating hole pattern of Actobotics Channel, this gear is most commonly mated to an 76 tooth hub gear spaced 1.5” apart to create a 3.8 reduction between the servo gear and the driven gear. Patented. 20° Pressure AngleWidth = 1/4” (.250”)

1908 Series Servo Hub (25 Tooth Spline, 32mm Diameter) - ServoCity

This 32 tooth servo gear has a 24 tooth servo spline which is common within Hitec standard size servos. The splined hole allows this servo gear to fit

Brass, 32P, 32 Tooth, C24T Spline Servo Gear

This 20 tooth servo gear has a 24 tooth servo spline which is common within Hitec standard size servos. The splined hole allows this servo gear to fit

Brass, 32P, 20 Tooth, C24T Spline Servo Gear

ServoCity, Actobotics

ServoCity, Actobotics

MOTION - Servos & Accessories - Servos - Page 1 - ServoCity

ServoCity, Actobotics

1908 Series Servo Hub (25 Tooth Spline, 32mm Diameter) - ServoCity

This 40 tooth servo gear is most commonly used to drive the 80 tooth hub gear, spaced 48mm away, in order to create a 2:1 ratio. This gear reduction

2305 Series Brass, MOD 0.8, Servo Gear (25 Tooth Spline, 40 Tooth)

MOTION - Servos & Accessories - Servos - Page 1 - ServoCity

This 20 tooth servo gear has a 15 tooth servo spline found on numerous Hitec Large Size (aka Giant Scale) servos. The splined hole allows this servo

Brass, 32P, 20 Tooth, D15T Spline Servo Gear

32P, 20 Tooth, 25T 3F Spline Servo Mount Gear (Acetyl)

20 Tooth Servo Gear, 4305?0025?0020 MOD 0.8 Brass Gear Industrial Supplies Parts : Toys & Games